clock page 1 of 2 raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a. phone: +001(305) 593-6033 fax: +001(305)594-3973 e-mail: sales@raltron.com internet: http://www.raltron.com 12 3 4 .197 .008 .276 .008 7.0 0.2 5.0 0.2 indicates pin 1. .079 max. 2.00 max. .200 5.08 .150 3.81 .055 1.40 typ. .050 1.27 .071 1.80 0.087 2.20 2.00 .079 0.2000 5.08 5x7 hcmos clock (see below for part numbering scheme) approvals raltron customer eng. approval, date: luis 4/17/02 name (please print): sales approval, date: title (please print): created by, date: alan 4/17/02 signature, date: revision: added note 2 page 2 (3/15/02), added 2.7 and 2.5vdc supply voltages (4/10/02); added 2.2vdc supply ; freq. table and mod p/n ( 4/30/03 ) . mechanical specification outline tolerance: 0.006? / 0.15mm (unless otherwise specified) pin functions: [1] enable / disable [2] case ground [3] output [4] supply voltage marking: tbd *0.01 f external by-pass filter is recommended as seen on solder pattern. electrical specification parameter symbol conditions value unit frequency, nom fo - 1.000~160.000 mhz supply voltage, nom. vcc vcc5% see part number generation table v supply current, max. is vcc=nom., ta=+25 c, load=15pf 10.0?55.0 (see note a) ma hcmos output levels voh / vol load=15pf, vcc=nom. 0.9 ? vcc / 0.1 ? vcc v duty cycle dc load=15pf / @50%vcc, ta=+25 c 45?55 or 40?60 % rise- / fall time, max. tr / tf 20%~80% vout, 80%~20% vout 1.5?10.0 (see note a) ns jitter, rms, max. j 1 , fj = 12khz?20mhz 1.0 ps overall freq. stability, max. ? f/fc including temperature, 10 year aging, +/-5% load & supply variations, and calibration @ +25 c. see part number generation table ppm enable option (pin 1) disable option (pin 1) en dis high or open (min.) ground (output pin high impedance) (max.) 0.7 ? vcc 0.3 ? vcc v v operating temperature range ta vcc=nom., ta=+25 c, load=15pf see part number generation table c storage temperature range t(stg) - -55?+125 c absolute voltage range vcc(abs) non-destructive, dc -0.5?+7.0 v 4/17/02 marketing-rfq, vcxo, cx90ns note a: supply current, rise & fall times are frequency dependent.
clock page 2 of 2 raltron electronics corp. 10651 n.w. 19 th st miami, florida 33172 u.s.a. phone: +001(305) 593-6033 fax: +001(305)594-3973 e-mail: sales@raltron.com internet: http://www.raltron.com 50% 80% logic 1 20% logic 0 tf tr 0% gnd 100% vcc symmetry 1 2 3 4 a v vcc gnd test point cl 0.01f *cl (capacitive load): includes the input capacitance of oscilloscope. **0.01f external by-pass filter is recommended. waveform: load = 15pf recommended test circuit with cmos load: ? part number generation series symmetry temperature range ( c) stability (overall) frequency (mhz) suffix cs2: 5.0v hcmos cs4: 3.3v hcmos csz: 2.7v hcmos csy: 2.5v hcmos csx: 2.2v hcmos a: 40%?60% t: 45%?55% r: 0?+50 s: 0?+70 u: -20?+70 v: -40?+85 h: 50 ppm j: 100 ppm (see note below) 1.000?156.250 (see table below) 4 4/17/02 marketing-rfq, vcxo, cx90ns series frequency range cs2: 5.0v hcmos cs4: 3.3v hcmos csz: 2.7v hcmos csy: 2.5v hcmos csx: 2.2v hcmos 1.000?107mhz 1.000?156.25mhz 40?107mhz 1.000?.40mhz 1.000?40mhz note: 1 .variations from standard specification are available, please contact factory. example: cs4tsh- 1 55.520-4
|
